NEXTITE AB200 High Strength Fast Cure

NEXTITE AB200 (formerly ACRI-BOND 200) delivers high strength and dependable performance when bonding plastics, metals and composites with minimal surface preparation. It provides a high strength bond with a short working time of 4-6 minutes, making it ideal for structural and general assembly applications. The thicker viscosity allows for easy, controlled application across a wide range of materials.

Product Overview

NEXTITE AB200 is a high-performance, two-part methyl methacrylate (MMA) structural adhesive engineered for demanding bonding applications. Designed for fast, reliable bonding of engineering plastics, metals, and composite materials, NEXTITE AB200 offers exceptional strength, durability, and ease of use.

With a short working time of 4 to 6 minutes, this adhesive is perfect for production lines that need a fast cure. It allows for efficient assembly without the need for extensive surface preparation or primers. It is particularly suited for bonding thermoplastics, powder-coated metals, raw metals, and composite assemblies where high strength and impact resistance are critical.

NEXTITE AB200 delivers rapid strength development at room temperature, along with excellent toughness, fatigue resistance, and long-term durability. Its non-sag, thixotropic formula makes it ideal for precise application, even on vertical surfaces. It also provides some gap filling capabilities of up to around 4mm. This adhesive is the go-to solution for industrial manufacturing, plastic fabrication, transportation, signage, and general assembly where consistent performance and structural integrity are required.

For production environments where medium working times are critical, NEXTITE AB210 offers the same performance and material compatibility as NEXTITE AB200 but with an increased working time of 14 to 17 minutes and a fixture time of 30 to 36 minutes.

Applications and Uses

NEXTITE AB200 bonds to a variety of substrates they include but aren’t limited to:

-        Plastics: Acrylic (PMMA), Polycarbonate (PC), Acrylonitrile Butadiene Styrene (ABS), Polyvinyl Chloride (PVC)

-        Metals: Aluminium, Steel, Stainless Steel, Powder Coated Surfaces

-        Composites: Fibreglass Reinforced Plastic (FRP), Carbon Fibre (CF)

-        Other: Glass, Concrete, Wood, MDF

NEXTITE AB200 will not adhere to plastics with a low surface energy such as Polypropylene (PP), Polyethylene (PE) or Polyolefins. These plastics can be structurally adhered to with NEXTITE AB206 and NEXTITE Cyanoacrylates also have a great bond when using NEXTITE SP 901 Primer.

Some applications of NEXTITE AB200 include:

 -        Transport Industry: Used to bond fibreglass (FRP), metal, and composites in vehicles like trucks, buses, trailers, and railcars.

-        Marine: Bonds composite hulls, decks, and marine components with strong resistance to moisture and saltwater.

-        Construction: Joins panels, facades, and modular building elements where strength and quick curing are critical.

-        Signage and Displays: Bonds plastic, metal, and composite parts in signs and displays for indoor and outdoor use.

-        Industrial Equipment: Used in machinery and appliance assembly for strong, impact- and vibration-resistant joints.

-        Automotive: Bonding structural or cosmetic repair of body panels, including re-bonding fiberglass or composite components.

Versatility of NEXTITE AB200

While bond strength is important, it’s not the only factor to consider when selecting an adhesive. Once fully cured, NEXTITE AB200 delivers a range of additional benefits that can make a real difference depending on your application. 

When fully cured NEXTITE AB200 can be sanded, grinded, routed and polished to get your desired finish. You can even paint over it!

-        Great Chemical Resistance

-        High resistance to weathering

-        Can be used in indoor and outdoor applications

-        Waterproofing when applied correctly

-        High Temperature resistance -40 to 140°C

Tools and Accessories

NEXTITE AB200 requires the use of a compatible dual cartridge dispensing applicator and static mixer nozzles, sold separately. Both the 50mL and 400mL Cartridges use standard 1:1 Ratio dual cartridge dispensing applicators and static mixers. It is important to use the correct applicator and mixer for each cartridge size, as 1:1 ratio systems are not compatible with other ratios cartridges and accessories. Each cartridge type requires the matching dispensing applicator and static mixer designed specifically for its ratio.

50mL Tubes

Dispensing Applicator: Manual 50mL 1:1 Dispensing Applicator | Manual Hand Plunger for 1:1 50mL Cartridges (for one time use)

Static Mixer Nozzles: 1:1 50mL Quadro B Type (Standard Tip) | 1:1 50mL Quadro B Type (Narrow Tip)

400mL Tubes

Dispensing Applicator: Manual 400mL 1:1 Dispensing Applicator | Pneumatic 400mL 1:1 Dispensing Applicator | Electric 400mL 1:1 Dispensing Applicator

Extra Static Mixer Nozzles: 1:1 400mL Quadro F Type (Green – White Base)

Technical Highlights

Strength Tests

** SF, AF, CF – determine how the substrate failed.

-        SF – Substrate Failure

-        AF – Adhesion Failure

-        CF – Cohesive Failure

Chemical Resistance

Instructions for use

1.     Use a static mixer nozzle to accurately mix the contents of the 1:1 cartridge. Each cartridge includes one Static Mixer Nozzle Green 1:1, and you can purchase more in 5, 10 and 50 packs from our store.

2.     You will also require a 1:1 Static Mixing Dispenser to push the contents through the static mixer. This is the best way to apply it and get accurate, dependable results every time.

3.     Parts to be joined should fit without forcing and be clean, it is recommended to use NEXTITE PROPREP prior to applying any product to remove any oils, dust and dirt. It is important to let out any air bubbles and ensure adhesive is fully mixed by dispensing the first part of the cartridge onto some paper. This is to make sure the two separate parts are fully mixed and is generally the first 2-3mL. Apply adhesive directly from the static mixer.

4.     Press parts together in firm contact and use a clamp to secure while the glue reacts. NEXTITE AB200 will achieve a working strength within 14-17 min and full cure strength within 24 hours. You have approximately 4-6 minutes to work with the glue before it starts to set off.

Please check the TDS for material suitability and strength of each bond. For a tutorial how to use please refer to our YouTube Chanel.

Shelf Life, Storage and Pack Size

NEXTITE AB200 has a 12 Month Shelf Life when stored correctly.

Store in a cool dry place out of direct sunlight, an enclosed cabinet is recommended, to extend the shelf life of this product. Keep the open container tightly closed do not leave open. 

50mL and 400mL Cartridges as well as 20kg Pails and 200kg Drums for high volume use.

Downloads

NEXTITE AB200 Technical Data Sheet | NEXTITE AB200 Material Safety Data Sheet