Plexus® MA300 from ITW is a two-part methacrylate adhesive commonly used for structural bonding of thermoplastics, metals, composites and similar materials. Known for its balanced combination of stiffness, toughness and high strength. MA300 offers a short cure time and is easy to use with a 1:1 mix ratio. It provides a working time of approximately 3 to 6 minutes and rapidly builds strength at room temperature. Its thixotropic, non-sag formulation makes it suitable for vertical or overhead applications, adding to its versatility across a wide range of industries.
Why do people search for alternatives of Plexus MA300?
Inconsistent Availability: Because of a short shelf life, Plexus MA300 is not commonly held in stock and often needs to be made or ordered to suit. This can lead to delays or inconsistent supply.
Price: Depending on your supplier, Plexus® MA300 can be quite expensive. While you may come across cheaper listings on platforms like Alibaba, these are often expired or grey-market stock sold without warranty or support.
Best Alternative for Plexus MA300
Based on our internal testing, customer feedback and ongoing demand, this is our most widely used replacement for Plexus MA300. We’ve developed NEXTITE AB200 to offer comparable performance with improved shelf life, availability and value.
 |
 |
|
| Product | NEXTITE AB200 | Plexus® MA300 |
| Price | $$ | $$$$ |
| Type | Methyl Methacrylate (MMA) | Methyl Methacrylate (MMA) |
| Mix Ratio | 1:1 | 1:1 |
| Working Time | 4 - 6 min | 3 - 6 min |
| Fixture Time | 14 - 16 min | 13 - 16 min |
| Colour | Cream | Cream |
| Viscosity | 40,000 - 70,000 CPS | 40,000 - 70,000 CPS |
| Lap Shear Strength Aluminium | 3400 psi | 3155 psi |
| Shelf Life | 12 months | 12 months |
Please note these values are approximate. Testing methods can vary depending on the application or conditions. For exact specifications, refer to our technical data sheet. If you have any questions or need advice, feel free to contact us directly.
Common Applications of Plexus MA300 and NEXTITE AB200
Both NEXTITE AB200 and Plexus® MA300 adhesives are ideal for bonding these substrates:
Thermoplastics like: Acrylic, Polycarbonate, PVC, ABS, ASA
Metals: Steel, Stainless Steel, Aluminium, Powder Coated Surfaces
Composites: Fibreglass, Carbon Fibre, Gel Coats
Other: Glass, Rubber, MDF, Wood
Pack Sizes
Cartridges: 50mL and 400mL
NEXTITE AB200 Technical Specification
| Adhesive Type | Methyl Methacrylate |
| Colour | Cream |
| Mix Ratio | 1:1 |
| Key Substrates | Metals, Plastics, Composites |
| Viscosity | 40,000 - 70,000 CPS |
| Maximum Gap Fill | 4mm |
| Working Time | 4 - 6 min |
| Fixture Time | 14 - 16 min |
| Full Strength | 24 hrs |
| Operating Temperatures | - 40 to 140 °C |
Questions About Alternatives for Plexus MA300?
Our adhesive specialists can help with any questions about our Plexus MA300 alternative, including helping you find the best alternative for Plexus® MA300 based on the specifics of your adhesive application. We have been in the adhesives industry for over 25 years and can use our experience to advise companies of all types and sizes.
Plexus® is a registered trademark of ITW Performance Polymers. NEXTITE Adhesives is not affiliated with ITW Performance Polymers. All names and part numbers are used for comparison purposes only.